+44 (0)1753 549 360

RSMGB3RL

MGB - 8 TPI 42mm Rear Left - 3 Bearing Banjo Axle

£78.75 (£94.50 inc VAT @ 20%)

Four RN12-MGB3 nuts per hub are required plus a spare (see notes below)

Type	Bolt-on Bolt-on splines, unless fitted as original equipment, will increase the track by approximately 1.25" per wheel
Threads Per Inch (T.P.I.)	8
Size	42mm Click here for a guide to identifying hub sizes
Number of Stud Holes	4
P.C.D.	4½" / 114.3 mm Click here for instructions on measuring PCDs
P.C.D.	P.C.D. is the Pitch Circle Diameter and is the diameter of an imaginary circle drawn through the centres of the holes
Notes	Click here for a guide to fitting hubs, caps and centre-lock wire wheels

Studs must be shortened otherwise they will foul the back of the wheel.

The recommended method of doing this is :

The reason for this is that very often when cutting back the studs the nut will get damaged.

Latest Products

UK Sales: 01753 549 360 UK Fax: 01753 547 170		Export Sales: +44 (0) 1753 598 382 Export Fax: +44 (0) 1753 773 443
Motor Wheel Service International Ltd, Units 1-4 Elder Way, Waterside Drive, Langley, Slough, Berkshire, SL3 6EP, UK