+44 (0)1753 549 360


Horsehair Brushes

Horsehair Brushes

Click to enlarge image

16.88 (20.26 inc VAT @ 20%)


  • Recommended operation: 250 RPM. Do not exceed 600 RPM.
  • Limit torque to 10 Nm. Too much torque will damage the brush.
  • The shaft of the brush must be completely inserted into the adapter of the drill.
  • Synthetic brushes are not suitable for sensitive or damaged surfaces.
  • Please check suitability of the synthetic brush on a concealed area first.
  • Use gloves and safety goggles to protect from cleaning fluid spray.
  • Protect any electrical parts from moisture.


  • For heavily soiled wheels use the synthetic brushes first.
  • For maximum cleaning performance and minimal bristle wear move the brush lightly without applying excessive pressure when working on surfaces and in hollow spaces.
  • Follow the shape of the rim when using the rotating brush and avoid tilting or twisting the brush.
  • Alternate between clockwise and counter-clockwise rotation of the brush.
  • The thread-like shape of the bristles will encourage the brush to move back and forward easily.
  • Make sure that the protective cap at the top is not damaged or twisted.
  • Remove blocked brushes only through rotation.

Caring for your Brushes:

  • Clean all brushes immediately after use with water and a standard household cleaner.
  • For oil or grease stained brushes use oil dissolving agents (e.g. wheel cleaner).
  • Place distorted brushes in warm water within 10 minutes after use.
  • Do not leave them to dry on their bristles.
  • Replace brushes which show damage or have lost too many bristles.

Safety Disclaimer:

We accept no liability for damage caused by improper use and by using worn or damaged brushes. The electric drive is always to be protected from moisture.

Click here to go to our Wheel Care advice page

Latest Products

  • MG J/P/L/N - 12 TPI 42mm Front Left
    Price: £100.98

  • MG J/P/L/N - 12 TPI 42mm Front Right
    Price: £100.98

  • Vredestein Sprint Classic 155R15 82S
    Price: £89.00

  • A reinforced inner tube suitable for beaded-edge tyre sizes 26x3 (700x80) and 26x2.5 (650x60) with an "on centre" metal valve stem

    26 x 2.5/3 Beaded Edge Metal Valve Tube with reinforced base
    Price: £14.00

  • Blockley 34 x 4 (25" Rim)
    Price: £375.00

UK Sales: 01753 549 360
UK Fax: 01753 547 170
Export Sales: +44 (0) 1753 598 382
Export Fax: +44 (0) 1753 773 443
Motor Wheel Service International Ltd, Units 1-4 Elder Way, Waterside Drive, Langley, Slough, Berkshire, SL3 6EP, UK
Webmaster | Contact Us | Terms and Conditions | Powered by ecGenius