• 
  • Brake Drums
  • Cleaning & Maintenance
  • Displays
  • Fitting & Balancing
  • Half Shaft
  • Hammers
  • Hub Puller
  • Spacers
  • Spinner Savers & Spanners
  • Spoke Wrenches
  • Studs & Retaining Nuts
  • Valves
  Accessories
• 
  • 32mm Knock-on
  • 42mm Knock-on
  • 52mm Knock-on
  • 62mm Knock-on
  • 72mm Knock-on
  • Bolt-on Caps
  Accessories - Centre Caps
• 
  • 42mm Hubs
  • 52mm Hubs
  • 62mm Hubs
  Accessories - Splined Hubs
• Borrani Wire Wheels
• 
  • 10" Tubes
  • 12" Tubes
  • 13" Tubes
  • 14" Tubes
  • 15" Tubes
  • 16" Tubes
  • 17"/18" Tubes
  • 19" Tubes
  • 20"/21" Tubes
  • 23" Tubes
  • Beaded-edge Tubes
  • Rim Bands
  Tubes & Rim Bands
• Tyres - Beaded Edge
• 
  • 15" Crossply
  • 16" Crossply
  • 17" Crossply
  • 18" Crossply
  • 19" Crossply
  • 20" Crossply
  • 21" Crossply
  Tyres - Crossply
• 
  • 10" Radial
  • 12" Radial
  • 13'' Radial
  • 14'' Radial
  • 15'' Radial
  • 16'' Radial
  • Metric Radial
  Tyres - Radial
• Tyres - Straight Sided
• 
  • 13" Bolt-on
  • 14" Bolt-on
  • 15" Bolt-on
  • 16" Bolt-on
  • 18" Bolt-on
  Wire Wheels - Bolt-on
• 
  • 13" Classic
  • 14" Classic
  • 15" Classic
  • 16" Classic
  • 17" Classic
  Wire Wheels - Classic Centre-lock
• 
  • Beaded-edge Rims
  • Classic Centres
  • Razor-edge Rims
  • Rolled-edge Rims
  • Spokes and Nipples
  • Two-piece or Straight-sided Rims
  • Vintage Centres
  Wire Wheels - Components
• 
  • 16" Vintage
  • 18" Vintage
  • 19" Vintage
  • 21" Vintage
  Wire Wheels - Vintage and Veteran Centre-lock

• Recommended operation: 250 RPM. Do not exceed 600 RPM.
• Limit torque to 10 Nm. Too much torque will damage the brush.
• The shaft of the brush must be completely inserted into the adapter of the drill.
• Synthetic brushes are not suitable for sensitive or damaged surfaces.
• Please check suitability of the synthetic brush on a concealed area first.
• Use gloves and safety goggles to protect from cleaning fluid spray.
• Protect any electrical parts from moisture.

• For heavily soiled wheels use the synthetic brushes first.
• For maximum cleaning performance and minimal bristle wear move the brush lightly without applying excessive pressure when working on surfaces and in hollow spaces.
• Follow the shape of the rim when using the rotating brush and avoid tilting or twisting the brush.
• Alternate between clockwise and counter-clockwise rotation of the brush.
• The thread-like shape of the bristles will encourage the brush to move back and forward easily.
• Make sure that the protective cap at the top is not damaged or twisted.
• Remove blocked brushes only through rotation.

• Clean all brushes immediately after use with water and a standard household cleaner.
• For oil or grease stained brushes use oil dissolving agents (e.g. wheel cleaner).
• Place distorted brushes in warm water within 10 minutes after use.
• Do not leave them to dry on their bristles.
• Replace brushes which show damage or have lost too many bristles.

Related Products